Cable Gland Heat - Shrink Washers

Application

Cable gland heat - shrink washers are washers with extremely high shrink ratios, capable of heat - shrinking and stress - relieving. After the joint crimping operation is completed, they are placed on the cable harness. The material with an extremely high shrink ratio can conveniently fill the gaps between the gland - type connector accessories and the cable. (When in place, cable gland heat - shrink washers can provide more consistent and convenient stress relief than many traditional seals, such as tapes, washers, or tape/washer combinations). The high shrink ratio of cable gland heat - shrink washers can match most typical cable harness shapes, ranging from single - conductor harnesses to high - density multi - conductor harnesses. Repairing and resealing using cable gland heat - shrink washers is very easy. Simply heat the washer until it softens, and pass a non - metallic probe through the center of the wire harness (to expand the inner diameter of the washer). After cooling, the washer will remain in the expanded state, allowing for the addition, removal, or re - repair of wires. Then the system can be inspected, reheated (to make it shrink again), positioned, and snapped into place.

Characteristics

- Short installation time - Excellent stress relief - Less error - prone - Easier to reseal - No winding tapes or lead accumulations in the washer - Typical installation only takes 10 - 20 seconds - The inner diameter can be repeatedly expanded, allowing for the addition of wires in the cable harness

Operating Temperature

Continuous operating temperature: -55°C ~ 135°C